Biochar-based functional materials for the abatement of emerging pollutants from aquatic matrices.

Biochar has emerged as a versatile and efficient multi-functional material, serving as both an adsorbent and catalyst in removing emerging pollutants (EPs) from aquatic matrices. However, pristine biochar's catalytic and adsorption capabilities are hindered by its poor surface functionality and small pore size. Addressing these limitations involves the development of functionalized biochar, a strategic approach aimed at enhancing its physicochemical properties and improving adsorption and catalytic efficiencies. Despite a growing interest in this field, there is a notable gap in existing literature, with no review explicitly concentrating on the efficacy of biochar-based functional materials (BCFMs) for removing EPs in aquatic environments. This comprehensive review aims to fill this void by delving into the engineering considerations essential for designing BCFMs with enhanced physiochemical properties. The focus extends to understanding the treatment efficiency of EPs through mechanisms such as adsorption or catalytic degradation. The review systematically outlines the underlying mechanisms involved in the adsorption and catalytic degradation of EPs by BCFMs. By shedding light on the prospects of BCFMs as a promising multi-functional material, the review underscores the imperative for sustained research efforts. It emphasizes the need for continued exploration into the practical implications of BCFMs, especially under environmentally relevant pollutant concentrations. This holistic approach seeks to contribute to advancing knowledge and applying biochar-based solutions in addressing the challenges posed by emerging pollutants in aquatic ecosystems.

Comparative study of the removal of sulfate by UASB in light and dark environment.

At present, the application of sewage treatment technologies is restricted by high sulfate concentrations. In the present work, the sulfate removal was biologically treated using an upflow anaerobic sludge blanket (UASB) in the absence/presence of light. First, the start-up of UASB for the sulfate removal was studied in terms of COD degradation, sulfate removal, and effluent pH. Second, the impacts of different operation parameters (i.e., COD/SO42- ratio, temperature and illumination time) on the UASB performance were explored. Third, the properties of sludge derived from the UASB at different time were analyzed. Results show that after 28 days of start-up, the COD removal efficiencies in both the photoreactor and non-photoreactor could reach a range of 85-90% while such reactors could achieve > 90% of sulfate being removed. Besides, higher illumination time could facilitate the removal of pollutants in the photoreactor. To sum up, the present study can provide technical support for the clean removal of sulfate from wastewater using photoreactors.

Effective immobilization and biosafety assessment of antimony in soil with zeolite-supported nanoscale zero-valent iron.

Antimony (Sb) contamination in certain areas caused by activities such as antimony mining and smelting poses significant risks to human health and ecosystems. In this study, a stable composite material consisting of natural zeolite-supported nanoscale zero-valent iron (Z-ZVI) was successfully prepared. The immobilization effect of Z-ZVI on Sb in contaminated soil was investigated. Experimental results showed that Z-ZVI exhibited superior performance compared to pure nano zero-valent iron (nZVI) in terms of stability, with a lower zeta potential (-25.16 mV) at a pH of 7 and a higher specific surface area (54.54 m2/g). It can be easily applied and dispersed in contaminated soils. Additionally, Z-ZVI demonstrated a more abundant porous structure. After 60 days of treatment with 3% Z-ZVI, the leaching concentration of Sb in the contaminated soil decreased from 1.32 mg/L to 0.31 mg/L (a reduction of 76%), and the concentration of available Sb species decreased from 19.84 mg/kg to 0.71 mg/kg, achieving a fixation efficiency of up to 90%. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis confirmed the effective immobilization of Sb in the soil through reduction of antimonate to antimonite, precipitation, and adsorption processes facilitated by Z-ZVI. Moreover, the addition of Z-ZVI effectively reduced the bioavailability of Sb in the contaminated soil, thereby mitigating its toxicity to earthworms. In conclusion, Z-ZVI can be utilized as a promising material for the safe remediation and antimony and other heavy metal-contaminated soils.

Impact of organic matter molecular weight on hexavalent chromium enrichment in green microalgae.

In lightly polluted water containing heavy metals, organic matter, and green microalgae, the molecular weight of organic matter may influence both the growth of green microalgae and the concentration of heavy metals. This study elucidates the effects and mechanisms by which different molecular weight fractions of fulvic acid (FA), a model dissolved organic matter component, facilitate the bioaccumulation of hexavalent chromium (Cr(VI)) in a typical green alga, Chlorella vulgaris. Findings show that the addition of FA fractions with molecular weights greater than 10 kDa significantly enhances the enrichment of total chromium and Cr(VI) in algal cells, reaching 21.58%-31.09 % and 16.17 %-22.63 %, respectively. Conversely, the efficiency of chromium enrichment in algal cells was found to decrease with decreasing molecular weight of FA. FA molecular weight within the range of 0.22 µm-30 kDa facilitated chromium enrichment primarily through the algal organic matter (AOM) pathway, with minor contributions from the algal cell proliferation and extracellular polymeric substances (EPS) pathways. However, with decreasing FA molecular weight, the AOM and EPS pathways become less prominent, whereas the algal cell proliferation pathway becomes dominant. These findings provide new insights into the mechanism of chromium enrichment in green algae enhanced by medium molecular weight FA.

Inorganic carbon limitation decreases ammonium removal and N2O production in the algae-nitrifying bacteria symbiosis system.

Ammonium removal by a symbiosis system of algae (Chlorella vulgaris) and nitrifying bacteria was evaluated in a long-term photo-sequencing batch reactor under varying influent inorganic carbon (IC) concentrations (15, 10, 5 and 2.5 mmol L-1) and different nitrogen loading rate (NLR) conditions (270 and 540 mg-N L-1 d-1). The IC/N ratios provided were 2.33, 1.56, 0.78 and 0.39, respectively, for an influent NH4+-N concentration of 90 mg-N L-1 (6.43 mmol L-1). The results confirmed that both ammonium removal and N2O production were positively related with IC concentration. Satisfactory ammonium removal efficiencies (>98 %) and rates (29-34 mg-N gVSS-1 h-1) were achieved regardless of NLR levels under sufficient IC of 10 and 15 mmol L-1, while insufficient IC at 2.5 mmol L-1 led to the lowest ammonium removal rates of 0 mg-N gVSS-1 h-1. The ammonia oxidation process by ammonia oxidizing bacteria (AOB) played a predominant role over the algae assimilation process in ammonium removal. Long-time IC deficiency also resulted in the decrease in biomass and pigments of algae and nitrifying bacteria. IC limitation led to the decreasing N2O production, probably due to its negative effect on ammonia oxidation by AOB. The optimal IC concentration was determined to be 10 mmol L-1 (i.e., IC/N of 1.56, alkalinity of 500 mg CaCO3 L-1) in the algae-bacteria symbiosis reactor, corresponding to higher ammonia oxidation rate of ∼41 mg-N gVSS-1 h-1 and lower N2O emission factor of 0.13 %. This suggests regulating IC concentrations to achieve high ammonium removal and low carbon emission simultaneously in the algae-bacteria symbiosis wastewater treatment process.

Favipiravir biotransformation by a side-stream partial nitritation sludge: Transformation mechanisms, pathways and toxicity evaluation.

Information on biotransformation of antivirals in the side-stream partial nitritation (PN) process was limited. In this study, a side-stream PN sludge was adopted to investigate favipiravir biotransformation under controlled ammonium and pH levels. Results showed that free nitrous acid (FNA) was an important factor that inhibited ammonia oxidation and the cometabolic biodegradation of favipiravir induced by ammonia oxidizing bacteria (AOB). The removal efficiency of favipiravir reached 12.6% and 35.0% within 6 days at the average FNA concentrations of 0.07 and 0.02 mg-N L-1, respectively. AOB-induced cometabolism was the sole contributing mechanism to favipiravir removal, excluding AOB-induced metabolism and heterotrophic bacteria-induced biodegradation. The growth of Escherichia coli was inhibited by favipiravir, while the AOB-induced cometabolism facilitated the alleviation of the antimicrobial activities with the formed transformation products. The biotransformation pathways were proposed based on the roughly identified structures of transformation products, which mainly involved hydroxylation, nitration, dehydrogenation and covalent bond breaking under enzymatic conditions. The findings would provide insights on enriching AOB abundance and enhancing AOB-induced cometabolism under FNA stress when targeting higher removal of antivirals during the side-stream wastewater treatment processes.

Integrated assessment of available water volume for sustainable sponge city construction - A case study in Xi'an, China.

To address the lack of theoretical guidance for sponge city construction (SCC) in China, this study introduces a method to evaluate the available water volume (AWV) in urban watersheds. This evaluation is based on the water balance relationship, water volume, and ecological water demand (EWD). The Xi'an urban area was selected as a case study due to its water shortage and flooding issues. Results show monthly surface and subsurface AWV ranging between 53.06 and 53.98 million m3 and between 8,701.89 and 8,898.14 million m3, respectively. By maximizing the potential for surface AWV, an annual water supply of 527.75 million m3 could be provided, surpassing the annual artificial water consumption of 394.20 million m3, effectively addressing water scarcity. During the rainy season, implementing measures such as employing permeable paving materials, establishing wetlands and rainwater gardens, and constructing lakes and reservoirs can mitigate flooding caused by rainfall exceeding 32.8 mm. While the subsurface space in Xi'an holds significant potential for subsurface AWV utilization, revitalizing the ecological environment of subsurface water is crucial. Overall, the AWV theoretical framework offers a comprehensive solution to water shortage and flooding issues in the Xi'an urban area, serving as a vital theory for SCC.

Split application of polymer-coated urea combined with common urea improved nitrogen efficiency without sacrificing wheat yield and benefits while saving 20% nitrogen input.

Controlled-release nitrogen fertilizer (CRNF) has been expected to save labor input, reduce environmental pollution, and increase yield in crop production. However, the economic feasibility is still controversial due to its high cost. To clarify the suitable application strategy of CRNF in promoting the yield, nitrogen use efficiency and income on wheat grown in paddy soil, four equal N patterns were designed in 2017-2021 with polymer-coated urea (PCU) and common urea as material, including PCU applied once pre-sowing (M1), PCU applied 60% at pre-sowing and 40% at re-greening (M2), 30% PCU and 30% urea applied at pre-sowing, 20% PCU and 20% urea applied at re-greening (M3), and urea applied at four stage (CK, Basal:tillering:jointing:booting=50%:10%:20%:20%). In addition, M4-M6, which reduced N by 10%, 20% and 30% respectively based on M3, were designed in 2019-2021 to explore their potential for N-saving and efficiency-improving. The results showed that, compared with CK, M1 did not significantly reduce yield, but decreased the average N recovery efficiency (NRE) and benefits by 1.63% and 357.71 CNY ha-1 in the four years, respectively. M2 and M3 promoted tiller-earing, delayed the decrease of leaf area index (LAI) at milk-ripening stage, and increased dry matter accumulation post-anthesis, thereby jointly increasing spike number and grain weight of wheat, which significantly increased yield and NRE compared with CK in 2017-2021. Due to the savings in N fertilizer costs, M3 achieved the highest economic benefits. With the 20% N reduction, M5 increased NRE by 16.95% on average while decreasing yield and net benefit by only 6.39% and 7.40% respectively, compared with M3. Although NRE could continue to increase, but the yield and benefits rapidly decreased after N reduction exceeds 20%. These results demonstrate that twice-split application of PCU combined with urea is conducive to achieving a joint increase in yield, NRE, and benefits. More importantly, it can also significantly improve the NRE without losing yield and benefits while saving 20% N input.

The identification of a correlation between lipid content in the model diatom Phaeodactylum tricornutum and pH treatment strategies.

pH treatment promotes single-cell lipid accumulation and significantly affects microalgae growth. This study investigates the correlation between lipid content and environmental pH using the model diatom Phaeodactylum tricornutum (P. tricornutum). We compared three distinct pH treatment strategies-continuous, intermittent, and a two-phase culture-in P. tricornutum. Rigorous analysis of chlorophyll content, cell density, and lipid content indicated that ongoing pH treatment at pH 9.5 (CHES) emerged as the most effective approach for lipid accumulation in P. tricornutum. The CHES buffer treatment significantly boosted total lipid yield and led to a reduction in protein content. Carbohydrate content experienced a slight decline under CHES buffer treatment, but changes were observed in the activities of key enzymes. Specifically, [acyl-carrier-protein] S-malonyltransferase (MAT) activity decreased after 3 days in the control treatment, while no significant change was noted under the CHES buffer treatment. In contrast, diacylglycerol O-acyltransferase (DGAT) activity showed upregulation 2 and 3 days post-CHES buffer treatment. Moreover, the study identified differentially expressed genes enriched in Gene Ontology (GO) terms associated with protein biosynthesis, photosynthesis, nucleoside metabolism, and transferase activity. These outcomes underscore the pivotal role of CHES buffer in orchestrating primary metabolism, potentially steering carbon flux towards lipogenesis. As a result, the potential of microalgae as a sustainable source of biofuels contributes significantly to the transition towards a more environmentally friendly energy landscape.

Inducement mechanism and control of self-acidification in elemental sulfur fluidizing bioreactor.

The sulfur fluidizing bioreactor (S0FB) has significant superiorities in treating nitrate-rich wastewater. However, substantial self-acidification has been observed in engineering applications, resulting in frequent start-up failures. In this study, self-acidification was reproduced in a lab-scale S0FB. It was demonstrated that self-acidification was mainly induced by sulfur disproportionation process, accounting for 93.4 % of proton generation. Supplying sufficient alkalinity to both the influent (3000 mg/L) and the bulk (2000 mg/L) of S0FB was essential for achieving a successful start-up. Furthermore, the S0FB reached 10.3 kg-N/m3/d of nitrogen removal rate and 0.13 kg-PO43-/m3/d of phosphate removal rate, respectively, surpassing those of the documented sulfur packing bioreactors by 7-129 times and 26-65 times. This study offers a feasible and practical method to avoid self-acidification during restart of S0FB and highlights the considerable potential of S0FB in the treatment of nitrate-rich wastewater.

The fate of nitrogen from different sources in a rice-wheat rotation system - A 15N labeling study.

High loss and low nitrogen (N) efficiency in agricultural production is severe. Also, ammonia volatilization and N leaching aggravated environmental pollution. The eutrophication of surface water and the emissions of N2O increased, hence green fertilization management urgently needs to be rationalized. Coordinating N supply from different sources has been shown to reduce environmental pollution. Therefore, this study was dedicated to clarifying the transport of N sources in the rice-wheat rotation system. The stable isotope tracer technology was used to label fertilizer (F), soil (T), and straw (J) with 15N, respectively. The utilization of N by crops (the N ratio in organs), as well as the residual N in soil and loss status, were measured. According to the potential of response to N, all the wheat cultivars were divided into groups with high (HNV) and low efficiency (LNV). The N contribution ratio showed that 43.28%~45.70% of total N accumulation was from T, while 30.11%~41.73% and 13.82%~24.19% came from F and J. The trend in soil N residue (T > F > J) was consistent with the above, while it was the opposite in N loss (T< F< J). The seasonal effectiveness showed that T achieved the highest N utilization efficiency (31.83%~44.69%), followed by F (21.05%~39.18%) and J (11.02%~16.91%). The post-season sustainability showed that T decreased the most in soil N residue (2.08%~12.53%), and F decreased the most in N accumulation (9.64%~18.13%). However, J showed an increase in N recovery rate (2.87%~5.89%). N translocation and distribution showed that N from different sources in grains was significantly higher than that in stems, glumes, and leaves. The ratio of HNV (75.14%~79.62%) was higher than that of LNV (71.90%~74.59%) in grain, while it was the opposite in other organs. Plant N accumulation, soil N supply, and straw N transformation were determined jointly by the three N sources, thus reducing N loss and N2O production. Therefore, the results will highlight the insights for constructing local N and emission reduction models.

Impacts of fulvic acid and Cr(VI) on metabolism and chromium removal pathways of green microalgae.

Green microalgae are highly efficient and cost-effective in the removal of heavy metals from water. However, dissolved organic matter (DOM), such as fulvic acid (FA), can impact their growth and heavy metal accumulation. Nonetheless, the specific mechanisms underlying these effects remain poorly understood. This study investigated the effects of different FA concentrations on the development, metabolism, and chromium (Cr) enrichment of Chlorella vulgaris, a standard green microalga. The findings revealed that low FA concentrations alleviated Cr-induced stress, stimulated microalgal growth, and enhanced energy conservation by suppressing chlorophyll synthesis. The highest chromium enrichment and reduction rates of 38.73% and 57.95% were observed when FA concentration reached 20 mg/L of total organic carbon (TOC). Furthermore, FA facilitated chromium removal by C. vulgaris through extracellular adsorption. Examination of microalgal cell surface functional groups and ultrastructure indicated that FA increased adsorption site electrons by promoting extracellular polymeric substance (EPS) secretion and enhancing the oxygen content of acidic functional groups. As a result, FA contributed to elevated enrichment and reduction rates of Cr in microalgal cells. These findings provide a theoretical basis for the prevention and control of heavy metal pollution in water environments.

New easily recycled carrier based polyurethane foam by loading Al-MOF and biochar for selective removal of fluoride ion from aqueous solutions.

The production of Integrated circuits (ICs) generates wastewater with a high concentration of residual fluoride ions, necessitating highly efficient fluorine removal methods. In this study, a novel composite carrier was developed using a hydrothermal synthesis method to load Al-MOF and biochar (BC) onto polyurethane foam (PUF), resulting in the composite foam of Al-MOF-PUF@BC. The results showed that the composite carrier exhibited a stable fluoride removal effect, with a maximum adsorption capacity of 16.52 mg/g at room temperature. The adsorption isotherm curves were consistent with the Langmuir isotherm model, and the adsorption kinetics were well-described by the pseudo-first-order model. The mechanism of fluorine adsorption on Al-MOF-PUF@BC was ligand exchange with hydroxyl groups and the formation of FAl bonds. Density functional theory (DFT) calculations revealed that the adsorption energy reached -246.7 eV, indicating stable adsorption for fluoride ions. The composite foam demonstrated excellent regenerative properties and was effective for fluoride removal in actual IC wastewater.

In-situ production of lactate driving the biotransformation of waste activated sludge to medium-chain fatty acid.

Medium-chain fatty acids (MCFAs) have drawn great attention due to their high energy density and superior hydrophobicity. Waste activated sludge (WAS) has been documented as a renewable feedstock for MCFAs production via anaerobic fermentation. However, MCFAs production from WAS depends on exogenous addition of electron donor (ED, e.g., lactate) for chain elongation (CE) bioprocess, which results in increased economic cost and limited practical application. In this study, a novel biotechnology was proposed to produce MCFAs from WAS with in-situ self-formed lactate by inoculating Yoghurt starter powder containing with Lactobacillales cultures. The batch experimental results revealed that the lactate was in-situ generated from WAS and the maximum production of MCFAs increased from 1.17 to 3.99 g COD/L with the increased addition of Lactobacillales cultures from 6✕107 to 2.3✕108 CFU/mL WAS. In continuous long-term test over 97 days, average MCFA production reached up to 3.94 g COD/L with a caproate yield of 82.74% at sludge retention time (SRT) 12 days, and the average MCFA production increased to 5.87 g COD/L with 69.28% caproate and 25.18% caprylate at SRT 15 days. A comprehensive analysis of the metagenome and metatranscriptome demonstrated that the genus of Lactobacillus and Streptococcus were capable of producing lactate from WAS and upgrading to MCFAs. Moreover, another genus, i.e., Candidatus Promineofilum, was firstly revealed that it might be responsible for lactate and MCFAs production. Further investigation of related microbial pathways and enzyme expression suggested that D-lactate dehydrogenase and pyruvate ferredoxin oxidoreductase contributed to lactate and acetyl-CoA production, which were the crucial steps for MCFAs generation and were most actively expressed. This study provides a conceptual framework of MCFAs from WAS with endogenous ED, potentially enhancing the energy recovery from WAS treatment.

Occurrence of microplastics in three types of household cleaning products and their estimated emissions into the aquatic environment.

Microplastics (MPs) in household cleaning products are a significant source of primary MPs. However, their presence in these products remain largely unknown. In this study, three types of common household cleaning products (laundry detergents, toilet bowl cleaners, and dishwashing detergents) were examined to assess the presence of MPs. The potential global emissions of MPs into aquatic environments resulting from the use of these products were estimated using statistics on global wastewater treatment plants (WWTPs) and household cleaning product markets. The average abundance of MPs in household cleaning products was 564.97 ± 327.83 n·kg-1, with toilet bowl cleaners having a significantly higher abundance than the other two products. The most commonly detected polymers in these products were polyamide (PA), silicone, polyurethane (PU), acrylate copolymer (ACR), polyethylene (PE), and polyethylene terephthalate (PET), while the size of the MPs ranged from 21.34 to 442.97 µm, with 81.52 % being <50 µm and 87.32 % being fragment-shaped. The estimated annual MP emissions from these three types of household cleaning products were 3.88 × 1013 ± 1.35 × 1013, with toilet bowl cleaners accounting for 56.44 % of the total emissions. MPs directly released without treatment in WWTPs (2.46 × 1013 n year-1) accounted for 63.40 % of the total emissions, highlighting the importance of increasing the treated rate of wastewater to reduce MP emissions. Sensitivity tests indicated that increasing the MP removal rates of secondary and tertiary WWTPs could also effectively reduce MP emissions. Moreover, gross and per capita MP emissions in 149 countries showed significant differences, which could be attributed to population, market size, demand for household cleaning products, and the level of MP removal among different countries. The findings of this study provide important insights into controlling MP contamination in household cleaning products.

New chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole antibiotics in water.

This study aims to develop a new chitosan-biochar composite derived from agricultural waste for removing sulfamethoxazole (SMX) antibiotics in water. Biochar was prepared from orange peel (OB) and spent coffee grounds (SCB). To fabricate chitosan-biochar composites, chitosan and biochar were crosslinked with glutaraldehyde. Results showed that pH, adsorbent dosage, time, temperature, and initial concentrations have a significant impact on the SMX adsorption. The adsorption data was better described by Langmuir (with good regression) than Freundlich model. The highest adsorption capacity (Qmax) of SMX on OB, SCB, CTS-OB, and CTS-SCB were 3.49, 7.65, 7.24, and 14.73 mg/g, respectively. The Freundlich constant (KF) values for adsorption capacity were 1.66, 1.91, 2.57, and 5.57 (mg1-nLn/g), respectively, for OB, SCB, CTS-OB, and CTS-SCB. Ion exchange, π bonding, hydrogen bonding and pore filling, were proposed as dominant mechanisms of SMX removal process.

Responses of biofilm communities in a hybrid moving bed biofilm reactor-membrane bioreactor system to sulfadiazine antibiotic exposure.

Antibiotics in wastewater can affect the structures and functions of bacterial communities, subsequently influencing how well a biological process performs. Therefore, the characteristics of bacterial community were investigated in a hybrid moving bed biofilm reactor-membrane bioreactor system when treating domestic wastewater containing sulfadiazine (SDZ). Results indicated total nitrogen removal reduced by 10.2%, 9.1%, 2.7% and 2.9%, respectively, with increasing carbon to nitrogen (C/N) ratios (2.5, 4, 6 and 9) when SDZ was present (0.5 mg/L). The microbial communities' analysis revealed that the abundance of nitrogen removal-related bacteria increased with C/N. Specifically, the abundance of ammonia-oxidizing bacteria (0.46%-0.90%) was low, and the nitrite-oxidizing bacteria (2.16%-7.13%) and denitrifying bacteria showed a significant increase (Hyphomicrobium: 0.57%-3.54%) when C/N ratio increased. The abundance of denitrifying bacterial declined by 4.82-8.56% at different C/N ratios, while nitrifying bacterial rose by 0.70-5.67%. Interestingly, the denitrifying bacteria Enterobacter, Sphingomonas and Gemmatimonas acted as mutualistic bacteria that stabilized denitrification.

Pilot-scale two-phase anaerobic digestion of deoiled food waste and waste activated sludge: Effects of mixing ratios and functional analysis.

Anaerobic co-digestion of deoiled food waste (dFW) and waste activated sludge (WAS) can address the challenges derived from mono-digestion of FW. In the present study, a pilot-scale methanogenic bioreactor of a two-phase anaerobic digestion system was developed to explore the impact of dFW/WAS volatile solids ratios on the overall performance, microbial community, and metabolic pathways. Besides, the tech-economic of the system was analyzed. The results showed that the degradation efficiency of soluble chemical oxygen demand (SCOD) was more than 84.90% for all the dFW/WAS ratios (v/v) (1:0, 39:1, 29:1, 19:1 and 9:1). Moreover, the dominant genus of bacteria and archaea with different ratios were Lactobacillus (66.84-98.44%) and Methanosaeta (53.66-80.09%), respectively. Co-digestion of dFW and WAS (29: 1 in v/v ratios) obtained the highest yield of methane (0.41 L CH4/Ladded) with approximately 90% of SCOD being removed. In the pilot-scale experiment, the co-digestion of FW and WAS makes positive contribution to reusing solid waste for improving solid management.

Influence of the COVID-19 pandemic on climate change summit negotiations from the climate governance perspective.

The COVID-19 pandemic has caused significant disruptions to the world since 2020, with over 647 million confirmed cases and 6.7 million reported deaths as of January 2023. Despite its far-reaching impact, the effects of COVID-19 on the progress of global climate change negotiations have yet to be thoroughly evaluated. This discussion paper conducts an examination of COVID-19's impact on climate change actions at global, national, and local levels through a comprehensive review of existing literature. This analysis reveals that the pandemic has resulted in delays in implementing climate policies and altered priorities from climate action to the pandemic response. Despite these setbacks, the pandemic has also presented opportunities for accelerating the transition to a low-carbon economy. The interplay between these outcomes and the different levels of governance will play a crucial role in determining the success or failure of future climate change negotiations.

Comparative review on microbial electrochemical technologies for resource recovery from wastewater towards circular economy and carbon neutrality.

Newly arising concepts such as the circular economy and carbon neutrality motivate resource recovery from wastewater. This paper reviews and discusses state-of-the-art microbial electrochemical technologies (METs), specifically microbial fuel cells (MFCs), microbial electrolysis cells (MECs) and microbial recycling cells (MRCs), which enable energy generation and nutrient recovery from wastewater. Mechanisms, key factors, applications, and limitations are compared and discussed. METs are effective in energy conversion, demonstrating advantages, drawbacks and future potential as specific scenarios. MECs and MRCs exhibited greater potential for simultaneous nutrient recovery, and MRCs offer the best scaling-up potential and efficient mineral recovery. Research on METs should be more concerned with lifespan of materials, secondary pollutants reduction and scaled-up benchmark systems. More up-scaled application cases are expected for cost structures comparison and life cycle assessment of METs. This review could direct the follow-up research, development and successful implementation of METs for resource recovery from wastewater.